Topping NX3s

Measured: 10.7cm*6.6cm*1.36cm
Weight:157g(Unit only)
Colour:Full black/Full silver
Power input: DC5V/1A(PC`s USB 0.5A is OK too)
Line In/Out:3.5mm
Headphone output:3.5mm
Battery capacity:2400mAh
Charge time: <4H Playback time:>18H
Power LED:Blue light (Light’s red when power is too low)
Charge LED:Light’s red(slow)or Light’s orange(fast) when NX4 DSD is charging;Light’s green when charge is completed.

<0.0017% 1kHz Output=273mW(32Ω)
<0.0025% 20-20kHz Output=273mW(32Ω)
<0.0003% 1kHz Output=50mW(300Ω)
<0.0008% 20-20kHz Output=50mW(300Ω) SNR@A-weighting: >120dB @1kHz
Frequency Response: 20Hz-200kHz (±0.55dB)
Output Level:11.5Vpp@32ΩGain=L,Bass=OFF

Noise: <2.5uVrms@Gain=L
Channel Crosstalk:-90dB@1kHz
Channel Balance:0.04dB
Gain: 0dB/8.8dB
Output Power: 545mW*2@32ΩTHD+N<1%
Adapter Impedance:16-300Ω

৳ 6,500.00

60-Days Protection

Money back guarantee

24/7 Guarantee

Support guarantee

Easy Payment

Debit/Credit cards

Provides with 20-200kHz frequency response and brings more details, high power output, could easily drive almost all headphones.
OPA2140+LME49720 design, LME49720 is installed on an OP AMP socket, DIYer can swap the OP AMP to get a different sound.
Volume knob design, lower the risk of accidental but unintended volume adjustment.
Bass boost and gain setting makes it fit for a wide range of input level. A built-in 2400mah Li-ion battery provides 18 hours playback time, can be charged with 0.5A or 1A USB power adapter.
Caution: If connected to a cellphone, it’s very likely to have constant pops, crackles and background noises due to the interference. Turn on the airplane mode is suggested.


There are no reviews yet.

Be the first to review “Topping NX3s”

Your email address will not be published. Required fields are marked *

Related Product