Desktop DAC
Showing 1–16 of 18 results
-
GUSTARD A18 MQA Bluetooth 5.0 AK4499 XMOS DAC LDAC DSD512 IIS Native Balance Decoder with Remote Control (Black, Silver))
৳ 60,000Quick ViewProduct specifications
Sample rate supported by digital input channels:
COAX:PCM 16-24bit/44.1-192kHz; DSD DOP64
AES:PCM 16-24bit/44.1-192kHz; DSD DOP64
OPT:PCM 16-24bit/44.1-192kHz;DSD DOP64
USB:PCM 16-32bit/44.1-768kHz; DSD DOP64-D0P256; NATIVE DSD:DSD64-DSD512
IIS:PCM 16-32bit/44.1-768kHz; DSD DOP64-DOP256; NATIVE DSD: DSD64-DSD512
BT Bluetooth 5.0: PCM LDAC，AAC,SBC，APTX, APTX LL，APTX HD and other high frequency
encoding，LDAC can achieve 24B/96K high code transmission* USB input supported operating system: WIN7 SP1/WIN8/WIN10 32-64bit;macOS;Linux
Analog output performance:
Amplitude frequency response:20-20kHz/+ -0.6dB
DNR:>124dB
Crosstalk:-129dB@1kHz
THD+N:<0.00015% 1kHz
IMD: <0.0008%@-3dBFs
RCA Output level: 3Vrms (VOLUME 00dB)
Output impedance 100 ohmsXLR Output level: 6.OVrms (VOLUME 00dB)
Output impedance 100 ohms
0ther specifications:
AC Power supply: AC 115V/230V 50/ 60Hz
Power consumption: <15W
Dimensions: Width 220mm*Height50mm*Depth 170mm
Weight: 2.5Kg -
GUSTARD DAC-A22 DAC Dual AK4499 XMOS Solution Native Balanced Decoder
৳ 120,000Quick View• Full interface supports DSD hard solution:
IIS supports DDS64, DSD128, DSD256, DSD512 hard solutions;
SPDIF, AES/EBU support DSD64, DSD128 hard solution (DOP mode);
Optical supports DSD64 (DOP mode);
USB supports DDS64, DSD128, DSD256, DSD512 hard solutions;• Rich digital filtering
There are 6 types of PCM: Short Delay Sharp Roll-off/Short Delay Slow Roll-off/Sharp Roll-off/Slow Roll-off/Super Slow Roll-off/Low Dispersion Short Delay Filter,
There are two types of DSD: L-BW and H-BW• USB uses XMOS 208, a USB AUDIO special chip from XMOS, supporting PCM768 DSD512
• The brightness of the screen is adjustable, it will be automatically remembered after 10 seconds of operation, and the last time it is set to maintain the last setting, humanized operation control;
• Machine size: width 330* depth 260* height 65MM (excluding protruding parts);
• Package size: length 420* width 360* height 175MM;
• Packing weight: 7.5KG;
• International voltage AC100V-240V (manual adjustment);
• Frequency response: 20Hz-20kHz +/-0.08dB
• Line output: RCA output level single-ended 3.0 Vrms @0dBFS, balanced 6.0 Vrms @0dBFS • XLR interface definition: US standard (1 ground, 2 hot, 3 cold)
-
GUSTARD DAC-X16 Two ES9068AS Balanced Full Decoding XU216 Processor OLED Screen High-Performance Audio Decoder
৳ 45,000Quick ViewSample rate supported by digital input channels:
C0AX: PCM 16-24bit/44.1-192kHz; DSD DOP64
AES: PCM 16-24bit/44.1-192kHz; DSD DOP64
OPT: PCM 16-24bit/44.1-192kHz; DSD DOP64
USB: PCM 16-32bit/44.1-768kHz; DSD DOP64-DOP256;
NATIVE DSD: DSD64-DSD512
IIS: PCM 16-32bit/44.1-768kHz; DSD DOP64-DOP256;
NATIVE DSD: DSD64-DSD512
BT Bluetooth 5.0: PCM LDAC,AAC, SBC,APTX,APTX LL,APTX HD and other high frequency encoding,
LDAC can achieve 24B/96K high code transmission
* USB input supported operating system: WIN7 SP1/WIN8/WIN10 32-64bit; macOS; Linux
Analog output performance:Amplitude frequency response: 20-20kHz/+-0.08dB
DNR: >126dB
Crosstalk: -130dB@1kHz
THD+N: <0.00010% 1kHz
IMD: <0.0004%@-1dBFs
RCA Output level: 2Vrms VOLUME 00dB)
Output impedance 100 ohms
XLR Output level: 4Vrms(VOLUME 00dB)
Output impedance 300 ohmsOther specifications:
AC Power supply: AC 115V/230V 50/ 60Hz
Power consumption:<15W
Dimensions:220mm*50mm**170mm
Weight: 2. 5Kg -
GUSTARD DAC-X22 ES9038PRO I2S XMOS HiFi DAC PCM384K DSD512 DOP Decoder (Black, Silver))
৳ 100,000Quick ViewFull balance Discrete components Analog Line.Balance / RCA output simultaneously.
Analog LPF circuit adopts independent development division line, carefully adjust the parameters of each level, in order to achieve the best working condition;
Support 0dB ~ -90dB file digital volume, cooperate with the attached with the high quality of the remote control is convenient to adjust the volume;
All interface support DSD hard solution:
IIS support DSD64,DSD128,DSD256,DSD512 hard solution;
SPDIF,Optical,AES/support the EBU DSD64 hard solution (DOP);
USB support DSD64,DSD128,DSD256 hard solution;Extensive digital filtering
PCM:M-SHARP /M-SLOW / L-SHARP / L-SLOW / HYBRID / APODIZING /BRICKWALL，
DSD: 47K/50K/60K/70K;USB XMOS company USBAUDIO use special chip U8 (XU208 and U8 kernel is the same), support PCM384 DSD256
Screen brightness is adjustable, no operation automatic memory after 10 seconds, the next boot keep last time Settings, humanized operation control;
Dimensions (excluding protruding part): W 330MM * H 65MM * D 260MM
Package Size:L 420MM*W 360*H 175MM
Weight:7KG -
GUSTARD X26 PRO MQA Full Decoding ES9038Pro*2 Chip DSD512 Bluetooth 5.0 XMOS XU216 High Performance Audio Decoder
৳ 135,000Quick ViewProduct Specifications:
Sample rate supported by digital input channels:
COAX : PCM 16-24bit/44.1-192kHz; DSD DOP64
AES : PCM 16-24bit/44.1-192kHz; DSD DOP64
OPT : PCM 16-24bit/44.1-192kHz; DSD DOP64
USB : PCM 16-32bit/44. 1-768kHz ; DSD DOP64-DOP256; NATIVE DSD: DSD64-DSD512
IIS : PCM 16-32bit/44. 1- 768kHz; DSD DOP64- -D0P256; NATIVE DSD: DSD64 -DSD512
BT Bluetooth 5.0 : PCM LDAC, AAC, SBC, APTX, APTX LL, APTX HD and other high frequency
encoding, LDAC can achieve 24B / 96K high code transmission
*USB input supported operating system: Win7 SP1/Win8/Win10 32-64bit; mac0S; Linux
Analog output performance :
Amplitude frequency response: 20- 20kHz /±0.1dB .
DNR: >128dB
Crosstalk: -140dB@1kHz .
THD+N: ≤0. 0001%@1kHz
IMD: <0. 0006% @-1dBFsRCA 0utput level: 2. 5Vrms (Volume 00dB)
Output impedance 100 ohms
XLR Output level: 5Vrms ((Volume 00dB)
Output impedance 100 ohmsOther specifications :
AC Power supply: AC 115V/230V 50/60Hz
Power consumption: <60W
Dimensions: Width 330mm * Height 65mm * Depth 260mm (Excluding protrusions)
Weight: 7Kg (including packaging) -
Matrix M-Stage HPA-3U⁺ Class A Headphone Amplifier + USB DAC Decoder
৳ 40,000Quick ViewSpeciflcations
Technical
Line Output
SNR＞-112dB at 20Hz-22kHz A-Weighting
THD+N＜0.0003% at 1kHz 1VRMS A-Weighting
Frequency Response : 20Hz-20kHz(+0.01dB/-0.04dB)
Output Impedance : 51ohmsHeadphone Output
SNR＞-112dB A-Weighting
THD+N＜0.0003% at 33ohms 90mW 1kHz A-Weighting
Frequency Response: 20Hz-20kHz(+0.01dB/-0.04dB)
Output Impedance : 0.2ohms
Output Power : 2800mW at 33ohms / 420mW at 300ohms / 210mW at 600ohms at THD+N=0.01%Gain Control
Gain 5=5dB 10=10dB 20=20dBUSB Input
USB Chip : XMOS U-Series Asynchronous USB Chip
D/A Chip : CIRRUS LOGIC CS4398
SNR＞-110dB A-Weighting
THD+N＜0.0009% at 1kHz A-Weighting
PCM Sample Rate : 16-24Bit /44.1kHz 48kHz 88.2kHz 96kHz 176.4kHz 192kHz
DSD Sample Rate : DSD2.8MHz/DSD5.6MHz（DoP and ASIO Native）System Support:
Windows XP/Vista/7/8/8.1 systems need to install the driver supplied
Mac OS X 10.6.4 and above version have native support and do not require a driver
Can be used with the most of Android devices via the OTG cable
Can be used with iOS devices via the Lightning to USB Camera Adapter
Power
Power Voltage : 230V position is fit for AC220V-240V 50/60Hz
115V position is fit for AC100V-120V 50/60Hz
Power Consumption＜25W
Fuse:AC250V/500mA 5×20mmOthers
Dimension:285×142×49mm L×W×H(Including the protruding part)
Weight:1.7kgAccessory
Driver&User Manual Disk×1
Power Cord×1
USB Cable×1 -
Matrix Mini-i Pro 3 DAC
৳ 95,000Quick ViewEmbrace Streaming Media
Matrix introduces streaming functionality into the Mini-i series audio DACs, so you can easily enjoy a huge selection of music sources. With Roon Ready, you can playback bit-perfect music streams through the Mini-i 3 and Mini-i Pro 3 over a LAN, or push music to Mini-i 3 and Mini-i Pro 3 from an iPhone, iPad, or any MAC computer on the network using AirPlay.Roon Ready
Roon finds the links between your music collection and the millions of tracks available on Internet, so you can start with the music you know, then explore and discover new music. The Mini-i Pro 3/Mini-i 3 act as an endpoint in Roon streaming media system, they transparently discover and connect to Roon without any configuration, and bit-perfect audio is delivered from Roon to Mini-i Pro 3/Mini-i 3.Balanced Headphone AMP
The Mini-i 3 and Mini-i Pro 3 feature a fully balanced headphone amplifier. This allows the left and right channel signals to pass through a nearly perfect symmetrical amplifier circuit, providing ample headphone output power with low distortion and low noise. The output power of single-ended headphone connection is increased by 50%, and the balanced headphone output is increased by 3 times compared to the previous generation. The addition of a 4.4mm balanced headphone jack makes it easier to connect various popular balanced headphones.HD Bluetooth & Dual Frequency Wi-Fi
When the Mini-i Pro 3 and Mini-i 3 connected to an LDAC enabled Android device over Bluetooth, up to 24Bit/96kHz high-res audio can be transmitted. The aptX HD technology allows compatible devices to transmit 24Bit/48kHz high-res audio wirelessly over bluetooth. The dual-band Wi-Fi and Ethernet connections enable the Mini-i Pro 3 to have high-speed and stable network access. The enclosed antenna system covers the different bands available on the Mini-i 3 and Mini-i Pro 3 for Bluetooth and Wi-Fi. Mini-i 3 does not support Wi-Fi connection. -
MATRIX X-SABRE Pro
৳ 1,850,000Quick ViewFull Port DSD
From now on, DSD audio stream is not limited to playback through the USB port, X-SABRE Pro support DoP or dCS from optical, coaxial and AES/EBU input, convenient to connect digital music player which with the DoP/dCS output function.
IIS Port
X-SABRE Pro is equipped with the most complete input ports of this series, in addition to optical, coaxial, AES/EBU, USB ports, we even added a IIS·LVDS input via a HDMI connector to differential transmit IIS signal, maximize the transmission performance of the IIS port, to make the data from the short-distance transmission between the chips into high-speed interconnection between the devices, get rid of the USB transmission or S/PDIF transmission re-encoding, and let the original digital audio stream directly into the D/A chip.
DSD1024 PCM768
As a new generation of Matrix flagship DAC, X-SABRE Pro not only supports 32Bit/768kHz PCM audio stream playback, but also supports DSD64, DSD128, DSD256, DSD512, and even supports DSD1024 with the sample rate of 45.158MHz via I²S input port.
Asynchronous or synchronous
X-SABRE Pro has the clock configuration circuit unit, can choose to use ES9038PRO synchronous clock source or external ultra-Low phase noise clock source, cooperate with software control to free convert ES9038PRO work mode between synchronous or asynchronous, and greatly improved the playability.
-
SMSL M200
৳ 25,500Quick View- The unit uses AKM’s flagship DAC chip the AK4497, with a well-designed circuit that delivers an unprecedented 0.00015% (-116dB) distortion!
- The 2nd XMOS solution, PCM supports up to 32bit/768kHz, and DSD supports up to DSD512, custom driver for Native DSD .
- Bluetooth 5.0 digital audio input, support APT-X, external antenna, transmission distance is farther.
- 6 digital filter modes and 3 sound color selection.
- DSD Volume Bypass , DSD is the original music without any treatment.
-
SMSL M400
৳ 75,000Quick View- Flagship DAC chip AK4499, the audio industry’s highest performance.
- The latest Bluetooth supports APTX/HD, SBC, AAC and the industry’s highest specification 24bit/192kHz UAT format!
- Support MQA full decode ! No matter where you are, it ’s like being on the scene.
- USB uses the second XMOS XU216,support native DSD and 32bit 768kHz!
- Support LVDS level differential I2 S reception (using HDMI interface), it can accept the lowest jitter digital audio!
-
SMSL SU9 MQA Bluetooth 5.0 Full Balanced Decoder
৳ 40,000Quick ViewSpecification:
Input: USB/Optical/Coaxial/Bluetooth
Output:RCA/XLR
THD+N:0.00009%(-121dB)
Dynamic range:XLR 130dB
RCA 123dB
SNR:130dB
Output impedance:XLR 207Ω
RCA 142Ω
USB transmission:Asynchronization
USB compatibility:Windows 7+,Mac OSX,Linux
Bit depth: USB 1bit,16-32bit
Optical/Coaxial 1bit,16-24bit
Sampling rate: USB PCM 44.1-768kHz
DSD 2.8224-22.5792MHZ
Optical/Coaxial PCM 44.1-192kHZ
DSD dsd64(DoP) -
Topping D10
৳ 8,000Quick View- D10 is a USB DAC with Line out, Opt/Coax output,D10 supports hard decoding DSD64-DSD256 Native and DSD64-DSD128 DOP;also supports 44.1-384kHz,PCM 16-32Bit.
- XMOS XU208 ES9018K2M OPA2134 and customized The sycon driver(Windows) to support maximum PCM384kHz/32bit and DSD256(Native).
- D10 has OP amp socket.Diyer could change the OP amp to get different sound;D10 s electrical parameters will change if use other OP.
- Display the format & sampling rate by indicator; Automatically turn on/off synchronize with the computer.
- D10 is compatible with Android, Windows(7 or 10), MAC.
-
Topping D10s
৳ 9,500Quick View- D10s is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256
- D10s uses XMOS XU208 for USB interface and uses customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.
- Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC.
- D10s can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night.
- D10s has OP amp socket, DIYer could change the OP amp to get different sound.
-
Topping D30 DSD Audio Decoder USB Coaxial Optical Fiber XMOS CS4398 24Bit 192KHz Decoder (Silver)
৳ 11,000Quick ViewThesycon Driver + XMOS XU208 + ES9018K2M + OPA2134
Line Out RCA ParametersTHD+N @A-weighting: ＜0.0008% at 1kHz
SNR @A-weighting: 115dB at 1kHz
Frequency Response: 20Hz-20kHz(±0.1dB)
Output Level: 2Vrms@0dBFS
Noise @A-weighting: ＜4uVrms
Crosstalk: -115dB@1kHz
Balance: 0.1dB
Output Impedance: 100 ohms
Support Computer System: Windows 7 or above, Mac OS and Linux
USB IN: 44.1kHz-384kHz/ 16Bit-32Bit, DSD64-DSD256 (Native), DSD64-DSD128 (DOP)
OPT/COAX OUT: 44.1kHz-192kHz/ 16Bit-24Bit
Power Input: DC5V/ 0.5A (USB powered)
Input: USB
Digital Output: OPT /COAX
Analog Output: Line Out -
Topping D70 Standard Edition
৳ 43,000Quick View- ♫ Various Input Interfaces: Support USB/Optical/Coaxial/AES/IIS (LVDS) input. Support DSD512/PCM 768kHz USB DAC, compatible with Windows, IOS and Android.
- ♫ Powerful Chip Combination: Use Thesycon Customized Driver+XMOS XU208 + Chip AK4497 x 2 + AK4118 Chip receiver.
- ♫ Wonderful Sound Quality: The output part uses 3 LME49720 op amps, VISHAY high-precision resistors and WIMA fever capacitors to make the output sound more appealing.
- ♫ Ultra-low Noise: Built-in ultra low noise linear regulators TPS7A4701 and TPS7A3301；Use 2 x ACCUSILICON femtosecond crystal to make the Jitter lower,Ideal for HiFi applications.
- ♫ Switchable Global Voltage: AC 100-120V 50/60Hz uses 115V, AC 220-240V 50/60Hz uses 230V.
-
Topping D90 MQA
৳ 73,000Quick View- ♬ High Quality Chips:(MQA D90 Version)AK4499 is AKM’s flagship model. With current output architecture and 4-channel design. The D90MQA parallels the channels of the AK4499 in pairs for better performance. Only USB input mode support MQA decoding.
- ♬ High-Resolution Music: With the support of AK4499 and XMOS,D90 can support 32bit768kHz and DSD512 resolutions,and the data magnitude and resolution are far beyond CD and SACD.Customized German Thesycon driver(Win7 and higher).
- ♬ Bluetooth 5.0 Tech: D90MQA is equipped with CSR8675 chip, supports Bluetooth 5.0 well,supports LDAC/AAC/SBC/APTX/APTX LL/APTX HD and other audio encoding.24bit96kHz HD transmission can be achieved under LDAC encoding.(If you don’t need Bluetooth input, you can turn it off in the menu.)
- ♬ Rich Input Interface: AES,USB,OPT,COAX,IIS,Bluetooth input.Among them, USB,IIS support 32bit/768k DSD512 input;AES,OPT,COAX support 24bit/192k input,BT supports 24bit/96k input under LDAC;IIS input can be set in the machine,compatible with most IIS signals on the market using HDMI transmission.
- ♬ AK4118 Receiver: It is currently the lowest jitter S/PDF receiver with good compatibility.It is used for D90 OPT,COAX, and AES receivers,all supporting up to 24bit/192kHz.