Desktop Combo
Showing all 7 results
-
FX Audio D01 DAC AMP Bluetooth 5.0 CSR8675 ES9038Q2M DAC 32Bit 768kHz DSD512 XU208 Line Out 6.35mm Decoder
৳ 13,000Quick ViewParameter:
Chipset: STM32+XMOSXU208+ES9038Q2M+TPA6120A2DWPR+LME49720NA+CSR8675
LineOut level output: 2Vrms@0dBFS
Distortion: <0.002%@1kHz
Signal to noise ratio: 115dB @1kHz
Dynamic range: 115dB @1kHz
Sampling Rate:
USB: 16bit-32bit /44.1kHz-768kHz, DSD64 DSD128 DSD256 DSD512;
Coaxial/Optical: 16Bit/24Bit 44.1kHz~ 192kHz;
BT: 16Bit/24Bit 44.1kHz~96 kHz
Amplifier power output:
400mW x2@32Ω2 THD+N< 1% 90mWx2@300ΩTHD+N<1%
Headphone distortion: <0.004%@1kHz
Headphone amplifier signal-to-noise ratio:> 110dB @1kHz
Frequency response: (+0, -0.5dB) (20Hz~ -20kHz)
Amp impedance: 16Ω-300
Output interface: LineOut, 6.35mm Headphone
Power supply: DC 12V1A
Size: 11.4*17.8*3.3.cm
Weight: 0.47kg -
Matrix element P music server preamplifier 9028 DAC combined Power Amplifier
৳ 260,000Quick ViewSpeciflcations
Digital Input
COAXIAL & OPTICAL
PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
DSD 2.8MHz (DoP)
IIS LVDS
PCM 16-32Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
DSD 2.8MHz, 5.6MHz, 11.2MHz (DoP)
DSD 2.8MHz, 5.6 MHz, 11.2 MHz, 22.4MHz, 45MHz (Native)
USB Audio
PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
DSD 2.8MHz, 5.6MHz, 11.2MHz (DoP)
DSD 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz (Native)
Speaker Output
SNR: >-121dB
THD+N: <0.008%@1W (8Ω, 1k)
Frequency Response: 20Hz-20kHz ±0.25 -3dB@85kHz
Output Impedance: <25mΩNetwork
LAN 10BASE-T/100BASE-TX
WLAN 2.4GHz/5GHz, IEEE 802.11 a/b/g/n/ac standardMA player
Format Supported:
MP3 , WMA , WAV , AIF, AIFC, AIFF, AAC, FLAC, OGG, APE, ALAC, M4A, DSF, DFF
PCM Sampling Rate:
PCM 16/24/32Bit 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
DSD Sampling Rate:
DSD 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHzUSB Storage Device
element p can use the devices which conform to the USB mass storage standard and supports FAT, FAT32, exFAT, and NTFS file formats, but is not guaranteed to be compatible with all storage devices or memory cards.
Output Power: 230W@4Ω, 110W@8Ω (1%THD+N)
Gain: +40dBPower：
Power Voltage
230V position is fit for AC220V-240V 50/60Hz
115V position is fit for AC100V-120V 50/60Hz
Stand-by Power Consumption
< 1W
Sleep Power Consumption
< 4W
No Play Consumption
< 22WOthers：
Dimension：340×281×60mm
(L×W×H, including the protruding part)
Weight：4.7Kg
Accessory：
RM3 remote control
Power cable
USB cable
WiFi antenna x2 -
Matrix Element X ES9038PRO/ES9311/Femtosecond Clock MQA DAC Pre-amp Headphone Amplifier
৳ 300,000Quick ViewTechnical
Digital Input
- COAXIAL & OPTICAL
- PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- DSD 2.8MHz (DoP)
- IIS LVDS
- PCM 16-32Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
- DSD 2.8MHz, 5.6MHz, 11.2MHz (DoP)
- DSD 2.8MHz, 5.6 MHz, 11.2 MHz, 22.4MHz, 45MHz (Native)
- USB Audio
- PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
- DSD 2.8MHz, 5.6MHz, 11.2MHz (DoP)
- DSD 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz (Native)
Line Output
- XLR
- SNR: > -131dB
- THD+N: <0.00012%@1k, <0.00025%@20Hz-20kHz
- Frequency Response: 20Hz-20kHz ±0.05 -3dB@120kHz
- Crosstalk : >-145dB
- XLR Amplitude: 4.5VRMS@0dB ,15.8VRMS@+10dB
- RCA
- SNR: > -124dB
- THD+N: <0.00012%@1k, <0.00025%@20Hz-20kHz
- Frequency Response: 20Hz-20kHz ±0.05 -3dB@105kHz
- Channel Crosstalk : >-137db
- RCA Amplitude: 2.3VRMS@0dB , 8VRMS@+10dB
Headphone Output
- XLR4 and Dual XLR3
- SNR: >-117dB
- THD+N: <0.00055%@20Hz-20kHz 1VRMS
- Frequency Response: 20Hz-20kHz ±0.05 -3dB@50kHz
- Output Impedance: <1.5Ω
- Output Power: 1700mw@33Ω, 1180mw@300Ω, 650mw@600Ω, 1%THD
- Gain: +18dB@Low Gain, +28dB@High Gain
- TRS 6.35mm
- SNR: >-112dB
- THD+N: <0.00055%@20Hz-20kHz 1VRMS
- Frequency Response: 20Hz-20kHz ±0.1 -3dB@50kHz
- Output Impedance: <1.5Ω
- Output Power: 1150mW@33Ω, 308mW@300Ω, 152mW@600Ω, 1%THD
Network
- LAN: 10BASE-T/100BASE-TX
- WLAN: 2.4GHz/5GHz, IEEE 802.11 a/b/g/n/ac standard
MA.PALYER
- Format Supported
- MP3 , WMA , WAV , AIF, AIFC, AIFF, AAC, FLAC, OGG, APE, ALAC, M4A, DSF, DFF
- PCM Sampling rate
- PCM 16/24/32Bit 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
- DSD Sampling rate
- DSD 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz
USB Storage Device
- element X can use the devices which conform to the USB mass storage standard and supports FAT, FAT32, exFAT, and NTFS file formats, but is not guaranteed to be compatible with all storage devices or memory cards.
Power
- Power Voltage
- 230V position is fit for AC220V-240V 50/60Hz 115V position is fit for AC100V-120V 50/60Hz
- Stand-by Power Consumption＜1W
- Sleep Power Consumption ＜4W
Others
- Dimension
- 340×281×60mm
- (L×W×H, including the protruding part)
- Weight
- 4.2kg
Accessories：
RM3 remote control
Power cable
USB cable
WiFi antenna x2
-
MATRIX X-SABRE Pro MQA XSP Master Digital Audio Hifi Music DSD DAC Decorder
৳ 210,000Quick ViewPowerful Hardware Platform
X-SABRE PRO (MQA) used the ES9038PRO advanced 8-channel D/A chip, and its inner DSP unit and artificial circuit have the high performance and better user experience. The new generation XMOS XU216 USB asynchronous transfer interface and new AK4118 S/PDIF receiver chip, with powerful computing performance and multi-channel processing performance, make X-SABRE Pro (MQA) has excellent digital audio conversion capability.
IIS Port
X-SABRE Pro (MQA) is equipped with the most complete input ports of this series, in addition to optical, coaxial, AES/EBU, USB ports, we even added a IIS·LVDS input via a HDMI connector to differential transmit IIS signal, maximize the transmission performance of the IIS port, to make the data from the short-distance transmission between the chips into high-speed interconnection between the devices, get rid of the USB transmission or S/PDIF transmission re-encoding, and let the original digital audio stream directly into the D/A chip.
More Sampling Rate Supported
X-SABRE PRO(MQA) can support the Master Quality Authenticated coding technology developed by UK MQA Limited which can decode the MQA audio stream up to 24 Bit 384kHz. When X-SABRE Pro’s display is showing “MQA”, it means it is decoding the MQA audio authorized by the artist or publisher (MQA Studio). Meanwhile, X-SABRE Pro also can support DSD512 and PCM audio stream up to 24Bit/768kHz sampling rate.
ASYNCHRONOUS OR SYNCHRONOUS
X-SABRE Pro (MQA) has the clock configuration circuit unit, can choose to use ES9038PRO synchronous clock source or external ultra-Low phase noise clock source, cooperate with software control to free convert ES9038PRO work mode between synchronous or asynchronous, and greatly improved the playability.
Ultra-Low Phase Noise Oscillator
Digital audio is the art of time, high-precision clock is to ensure the basis of digital audio playback, X-SABRE Pro build-in three hi-res audio dedicated Crystek ultra-low phase noise oscillators, the phase noise as low as -169 dBc/Hz. Two for sample rate of 44.1kHz, 48kHz, and their multiples, and one for ES9038PRO reference clock, you can hear the accurate sound!
ULTRA-LOW NOISE LDO
ES9311Q dedicated ultra low noise LDO, with two groups clean power supply as low as 1μVrms noise, respectively provide to the left and right channels analog circuit of ES9038PRO to ensure excellent SNR performance, in additional, X-SABRE Pro also has up to 10 groups of low-noise LDO power supply for each circuit unit.
Multiple Filters Preinstalled
X-SABRE PRO (MQA) preinstalled 7 kinds of PCM digital filter options. You can choose different filters to adjust timbre conveniently. During the MQA decoding progress, X-SABRE Pro can automatically load the MQA audio dedicated filter.
BUILT-IN PRE-AMP
The line output of X-SABRE Pro can be configured with a +18dB digital gain. It’s not necessary to add an additional pre-amplifier for low-gain active speakers. X-SABRE Pro also can work with power amplifier more conveniently and flexibly.
Touch & Remote
X-SABRE PRO(MQA) inlaid a piece of black tempered glass in its front panel, and the central round LCD can directly show the input signal channel, digital audio format, sample rate, volume, etc. Without using the remote control, you can operate it by touch the 9 hidden touch-key in the LCD on the front panel.
COMPONENTS & WORKMANSHIP
X-SABRE Pro (MQA) continued the new chapter for Matrix competitive DAC with its accurate sound field performance, amazing dynamic range, more extensive applicability, more convenient operation, more gorgeous appearance and more consummate skill.
Digital Input
AES
PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
DSD DSD64 (DoP/dCS)
COAXIAL
PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
DSD DSD64 (DoP/dCS)
OPTICAL
PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
DSD DSD64 (DoP/dCS)
IIS（PS AUDIO Standard）
PCM 16-32Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
DSD DSD64/128/256 (DoP/dCS) DSD64/128/256/512/1024(Native DSD)
NOTE: Please see the X-SABRE Pro (MQA) user manual for the IIS LVDS definition.
USB
PCM 16-24Bit /44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768kHz
MQA 16-24Bit /44.1kHz、48kHz、88.2kHz、96kHz、176.4kHz、192kHz、352.8kHz、384kHz MQA Studio or MQA stream
DSD DSD64/128/256 (DoP/dCS) DSD64/128/256/512 (ASIO Native)
NOTE: Due to the technical specifications of MQA technology, the input bit depth of X-SABRE Pro (MQA)
is limited in 24Bit currently.
System Support
Windows7/8/8.1/10 systems need to install the supplied drivers.
Mac OS X10.6.4 and above version without installing drivers.
Most Android devices can be connected via OTG cable.
The iOS devices can be used via the Apple Camera Connection Kit.
Analog Output
XLR
SNR : > -134dB 20Hz-20kHz A-Weighting
THD+N : <0.00012% at 1kHz A-Weighting
<0.00015% at 20Hz-20kHz A-Weighting
Frequency Response : 20Hz-20kHz (+0.01dB/-0.02dB)
Crosstalk : > -151dB @1kHz
XLR Output : 4.5Vrms Fixed at 0 dBFS DAC MODE
0-4.5Vrms Adjustable at 0 dBFS PRE MODE
RCA
SNR : >-129dB 20Hz-20kHz A-Weighting
THD+N : <0.00018% at 1kHz A-Weighting
<0.00030% at 20Hz-20kHz A-Weighting
Frequency Response : 20Hz-20kHz (+0.01dB/-0.02dB)
Crosstalk : >-143dB @1kHz
RCA Output : 2.25Vrms Fixed at 0 dBFS DAC MODE
0-2.25Vrms Adjustable at 0 dBFS PRE MODE
Power
Power Voltage : 230V position is fit for AC220V-240V 50/60Hz
115V position is fit for AC100V-120V 50/60Hz
Power Consumption : <10W
Others
Dimension : 300×218×45mm（L×W×H, including the protruding part）
Weight : 3.7KG
Accessory
RM2 Remote Control× 1
Power Cord× 1
USB Cable× 1
-
Topping DX3 Pro LDAC
৳ 21,500Quick View- Built in 2*AK4493 chip,1*AK4118 chip.
- BT is support to AAC/SBC/APTX/APTX-LL/APTX-HD.
- Headphone amp output power support to 1000mW*2@32Ω；125mW*2@300 Ω.
- USB is support to DSD64-DSD512(Native);DSD64-DSD256(DOP).
- This is Topping DX3 Pro LDAC V2 version
-
Topping DX7s
৳ 43,000Quick ViewFeatures:TOPPING DX7s is a full balanced DAC & headphone amp with USB, Coaxial, Optical, AES input and Line Out, XLR, 6.35 headphone and balanced headphone output. Besides, DX7s also have a USB to Coaxial output, you can use it as a digital interface even DX7s is turned off.DX7s use XMOS(XU208) + 2 x ES9038Q2M + 4 x OPA1612 for DAC, in addition, DX7s use customized drivers(Win 7 or above) from Thesycon, all these factors makes DX7s support 32bit/768kHz and DSD512(Native). You can see the detail info from the 2.23 inch OLED screen while DX7s is working. DX7s use 2 x TPA6120 for balanced headphone amp, providing maximum1000mW x 2@32ohm load.* Customized Thesycon driver + XMOS XU208 + 2 x ES9038Q2M + 4 x OPA1612.* Support Maximum DSD512 and PCM32bit/768kHz.* Full balanced DAC + Full balanced headphone amp.* 2.23 inch OLED screen.* Auto on/off for all inputs. -
Topping DX7S Full Balanced DAC Headphone Amplifier
৳ 45,000Quick ViewHeadphone amp output:
6.35mm output
THD+N:<0.005% @ 1kHz Output=345mW(32Ω) <0.007% @ 20-20kHz Output=345mW (32Ω) <0.0008% @ 1kHz Output=78mW(300Ω) <0.0008% @ 20-20kHz Output=78mW(300Ω) SNR:>121dB @ 1kHz
Frequency Response:20Hz-20kHz(±0.35dB)
Output Level:13.3Vpp @ 32Ω
18.7Vpp @ 300Ω
Noise:<5.2uVrms Crosstalk:-124dB @1kHz Channel Balance:0.3 dB Output Impedance:<10Ω Output Power:690mW x 2 @ 32Ω THD+N<1% 146mW x 2 @ 300Ω THD+N<1% Drive Ability:16-300Ω Balanced output THD+N:<0.002% @ 1kHz Output=515mW(32Ω) <0.003% @ 20-20kHz Output=515mW (32Ω) <0.0006% @ 1kHz Output=273mW(300Ω) <0.0008% @ 20-20kHz Output=273mW(300Ω) SNR:>120dB @ 1kHz
Frequency Response:20Hz-20kHz(±0.12dB)
Output Level:16.2Vpp @ 32Ω
36.2Vpp @ 300Ω
Noise:<8.8uVrms Crosstalk:-129dB @1kHz Channel Balance:0.3 dB Output Impedance:<20Ω Output Power:1000mW x 2 @ 32Ω THD+N<1% 546mW x 2 @ 300Ω THD+N<1% Drive Ability:32-600Ω LineOut COAX Input RCA THD+N:<0.0005% @ 1kHz <0.0006% @ 20-20kHz SNR:>122dB @ 1kHz
Frequency Response:20Hz-20kHz(±0.35dB)
Output Level:2Vrms @ 0dBFS
Noise:<1.7uVrms Crosstalk:-127dB @1kHz Channel Balance:0.3 dB Output Impedance:100Ω XLR THD+N:<0.0005% @ 1kHz <0.0006% @ 20-20kHz SNR:>123dB @ 1kHz
Frequency Response:20Hz-20kHz(±0.35dB)
Output Level:4Vrms @ 0dBFS
Noise:<2.6uVrms Crosstalk:-133dB @1kHz Channel Balance:0.3 dB Output Impedance:200Ω