Topping
Showing 1–16 of 23 results
-
Topping A50s
৳ 19,000- ♬ ULTRA-HIGH PERFORMANCE NFCA BALANCED MODELES: A50s uses the same NFCA (Nested Feedback Composite Amplifier)module from flagship A90. Voltage Current hybrid feedback architecture along withUHGF(Ultra High Gain Feedback)technology provides excellent DC and AC performance.
- ♬ HIGH OUTPUT CURRENT DRIVE CAPABILITY: It allows the amp driving low impedance headphones with ease. Ultra-low noise of 0.3uV is miles ahead of the competition,giving an absurdly high dynamic range of 144dB and no audio noise and darkest background for the most sensitives IEMs.
- ♬ WIDE RANGE OF ADAPTATION TO HEADPHONES: A50s has a high voltage swing of 42vp-p, power of 3500mW per channel when both channels are driven and output impedance of less than 0.1ohm. It easily drives power-hungry headphones with a wide range of different impedance.
- ♬ TOPPING A50s EXCELLENT PREAMP: The NFCA modules of A50s are not only able to drive the headphones but also apply to be a preamplifier with the same ultra-high performance. When it is in preamp mode, output impedance is as low as 20ohm, which is widely suitable for various devices.
- ♬ HPA / PRE AUTOMATIC SWICHING: When the A50s is not connected to any headphones, it automatically works in the preaplifier mode, and the amplified signal is output from the RCA on the back panel. When the headphone is connected to 6.35mm or 4.4mm output, A50s automatically switches to the headphone amp mode, and the signal is only output to the 6.35mm and 4.4mm jack.
-
Topping A90
৳ 43,000- ♫ Headphone-amp & Pre-amp: The NFCA modules of A90 are not only able to drive the headphone but also apply to be the pre-amp. When it is in pre-amp mode, the 20ohm SE and 40 ohm balanced output impedance are widely suitable for various-power amplifiers Ultra.
- ♫ Full balanced SE Headphone Output: A90 has three output headphone jacks of 4-PIN-XLR, 4.4 balancedand 6.35 SE to meet different usages.
- ♫ 3 Step gain setting & adapt to various sensitivities: A90 is equipped with three gain settings of -95dB/0dB/9.5dB for SE and-35dB /6.0dB/15.5dB for balanced. The SE 25Vpp / balanced 49Vpp high output voltage.
- ♫ High output current drive capability A the amp driving low impedance headphones with ease: Ultra low noise of 0.2uV is miles ahead of the competition giving absurdly high dynamic range of 145dB and no audible noise and darkest background for the most sensitive IEMS.
- ♫ Ultra-high Performance NFCA modules: A90 implemented the first member of the new NFCA(Nested Feedback Composite Amplifier) module series Voltage Current hybrid feedback architecture along with UHGF(ultra high gain feedback) technology rovide excellent DC and AC performance.
-
Topping BC3
৳ 6,200TOPPING BC3 is a compact Bluetooth decoder that supports Bluetooth 5.0 and LDAC transmission, while outputting digital optical fiber, headphone jack and Line Out interface, and built-in battery. It can be used as a complement to the Bluetooth input of the decoder, can be used as a portable Bluetooth amp, and can be used as the Bluetooth input of a sound system. The TOPPING BC3 is small and exquisite, but it meets your needs and gives you a different music enjoyment.6200
-
Topping D10
৳ 8,000- D10 is a USB DAC with Line out, Opt/Coax output,D10 supports hard decoding DSD64-DSD256 Native and DSD64-DSD128 DOP;also supports 44.1-384kHz,PCM 16-32Bit.
- XMOS XU208 ES9018K2M OPA2134 and customized The sycon driver(Windows) to support maximum PCM384kHz/32bit and DSD256(Native).
- D10 has OP amp socket.Diyer could change the OP amp to get different sound;D10 s electrical parameters will change if use other OP.
- Display the format & sampling rate by indicator; Automatically turn on/off synchronize with the computer.
- D10 is compatible with Android, Windows(7 or 10), MAC.
-
Topping D10s
৳ 9,500- D10s is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256
- D10s uses XMOS XU208 for USB interface and uses customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.
- Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC.
- D10s can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night.
- D10s has OP amp socket, DIYer could change the OP amp to get different sound.
-
Topping D30 DSD Audio Decoder USB Coaxial Optical Fiber XMOS CS4398 24Bit 192KHz Decoder (Silver)
৳ 11,000Thesycon Driver + XMOS XU208 + ES9018K2M + OPA2134
Line Out RCA ParametersTHD+N @A-weighting: <0.0008% at 1kHz
SNR @A-weighting: 115dB at 1kHz
Frequency Response: 20Hz-20kHz(±0.1dB)
Output Level: 2Vrms@0dBFS
Noise @A-weighting: <4uVrms
Crosstalk: -115dB@1kHz
Balance: 0.1dB
Output Impedance: 100 ohms
Support Computer System: Windows 7 or above, Mac OS and Linux
USB IN: 44.1kHz-384kHz/ 16Bit-32Bit, DSD64-DSD256 (Native), DSD64-DSD128 (DOP)
OPT/COAX OUT: 44.1kHz-192kHz/ 16Bit-24Bit
Power Input: DC5V/ 0.5A (USB powered)
Input: USB
Digital Output: OPT /COAX
Analog Output: Line Out -
Topping D50s
৳ 21,500- ♫ Efficient Decoding Capability:USB of D50s supports highest DSD512 and PCM 32bit/768kHz.COAX and OPT of D50s supports hightest PCM 24bit/192kHz and DOP DSD64.
- ♫ Powerful Chip Combination: Customized Thesycon driver + XMOS XU208 + 2 x ES9038Q2M + 3 x OPA1612 for DAC.
- ♫ Bluetooth 5.0 Hi-Res Audio Wireless HD: The D50s is equipped with a CSR8675 Bluetooth chip and supports audio encoding such as LDAC/AAC/SBC/aptX/aptX-LL/aptX-HD.
- ♫ Multiple Output Methods:TOPPING D50s is a high performance desktop DAC with USB,coaxial,optical input and Line Out output.
- ♫ The OPA1612 and LME49720 op amps form the L50s of the D50s, ensuring lossless transmission of signals. (The LME49720 op amp is equipped with an outlet.)
-
Topping D70 Standard Edition
৳ 43,000- ♫ Various Input Interfaces: Support USB/Optical/Coaxial/AES/IIS (LVDS) input. Support DSD512/PCM 768kHz USB DAC, compatible with Windows, IOS and Android.
- ♫ Powerful Chip Combination: Use Thesycon Customized Driver+XMOS XU208 + Chip AK4497 x 2 + AK4118 Chip receiver.
- ♫ Wonderful Sound Quality: The output part uses 3 LME49720 op amps, VISHAY high-precision resistors and WIMA fever capacitors to make the output sound more appealing.
- ♫ Ultra-low Noise: Built-in ultra low noise linear regulators TPS7A4701 and TPS7A3301;Use 2 x ACCUSILICON femtosecond crystal to make the Jitter lower,Ideal for HiFi applications.
- ♫ Switchable Global Voltage: AC 100-120V 50/60Hz uses 115V, AC 220-240V 50/60Hz uses 230V.
-
Topping D90 MQA
৳ 73,000- ♬ High Quality Chips:(MQA D90 Version)AK4499 is AKM’s flagship model. With current output architecture and 4-channel design. The D90MQA parallels the channels of the AK4499 in pairs for better performance. Only USB input mode support MQA decoding.
- ♬ High-Resolution Music: With the support of AK4499 and XMOS,D90 can support 32bit768kHz and DSD512 resolutions,and the data magnitude and resolution are far beyond CD and SACD.Customized German Thesycon driver(Win7 and higher).
- ♬ Bluetooth 5.0 Tech: D90MQA is equipped with CSR8675 chip, supports Bluetooth 5.0 well,supports LDAC/AAC/SBC/APTX/APTX LL/APTX HD and other audio encoding.24bit96kHz HD transmission can be achieved under LDAC encoding.(If you don’t need Bluetooth input, you can turn it off in the menu.)
- ♬ Rich Input Interface: AES,USB,OPT,COAX,IIS,Bluetooth input.Among them, USB,IIS support 32bit/768k DSD512 input;AES,OPT,COAX support 24bit/192k input,BT supports 24bit/96k input under LDAC;IIS input can be set in the machine,compatible with most IIS signals on the market using HDMI transmission.
- ♬ AK4118 Receiver: It is currently the lowest jitter S/PDF receiver with good compatibility.It is used for D90 OPT,COAX, and AES receivers,all supporting up to 24bit/192kHz.
-
Topping DX3 Pro LDAC
৳ 21,500- Built in 2*AK4493 chip,1*AK4118 chip.
- BT is support to AAC/SBC/APTX/APTX-LL/APTX-HD.
- Headphone amp output power support to 1000mW*2@32Ω;125mW*2@300 Ω.
- USB is support to DSD64-DSD512(Native);DSD64-DSD256(DOP).
- This is Topping DX3 Pro LDAC V2 version
-
Topping DX7 Pro
৳ 56,000- DX7 pro uses ESS DAC ES9038PRO chip,with TOPPING elaborate design and adjustment,the distortion is <0. 00010%,DNR <126dB,and SNR <126dB,accurately restores each wonderful note to your ears.
- Bluetooth 5.0,redefining HD wireless audio with LDAC
- DX7Pro uses CSR8675 chipset to support Bluetooth 5.0 and LDAC/AAC/SBC/APTX/APX LL/APX HD protocol.
- DX7 Pro could achieve 24bit 96KHZ HD transmission With LDAC, the Bluetooth could have good sound performance from right on.
- XMOS XU208 and Thesycon customized driver(Win 7 and above)gives the DX7 Pro superior decoding capability on USB;PCM support up to 32bit 768KHZ and DSD support to DSD512(native).
-
Topping DX7s
৳ 43,000Features:TOPPING DX7s is a full balanced DAC & headphone amp with USB, Coaxial, Optical, AES input and Line Out, XLR, 6.35 headphone and balanced headphone output. Besides, DX7s also have a USB to Coaxial output, you can use it as a digital interface even DX7s is turned off.DX7s use XMOS(XU208) + 2 x ES9038Q2M + 4 x OPA1612 for DAC, in addition, DX7s use customized drivers(Win 7 or above) from Thesycon, all these factors makes DX7s support 32bit/768kHz and DSD512(Native). You can see the detail info from the 2.23 inch OLED screen while DX7s is working. DX7s use 2 x TPA6120 for balanced headphone amp, providing maximum1000mW x 2@32ohm load.* Customized Thesycon driver + XMOS XU208 + 2 x ES9038Q2M + 4 x OPA1612.* Support Maximum DSD512 and PCM32bit/768kHz.* Full balanced DAC + Full balanced headphone amp.* 2.23 inch OLED screen.* Auto on/off for all inputs. -
Topping DX7S Full Balanced DAC Headphone Amplifier
৳ 45,000Headphone amp output:
6.35mm output
THD+N:<0.005% @ 1kHz Output=345mW(32Ω) <0.007% @ 20-20kHz Output=345mW (32Ω) <0.0008% @ 1kHz Output=78mW(300Ω) <0.0008% @ 20-20kHz Output=78mW(300Ω) SNR:>121dB @ 1kHz
Frequency Response:20Hz-20kHz(±0.35dB)
Output Level:13.3Vpp @ 32Ω
18.7Vpp @ 300Ω
Noise:<5.2uVrms Crosstalk:-124dB @1kHz Channel Balance:0.3 dB Output Impedance:<10Ω Output Power:690mW x 2 @ 32Ω THD+N<1% 146mW x 2 @ 300Ω THD+N<1% Drive Ability:16-300Ω Balanced output THD+N:<0.002% @ 1kHz Output=515mW(32Ω) <0.003% @ 20-20kHz Output=515mW (32Ω) <0.0006% @ 1kHz Output=273mW(300Ω) <0.0008% @ 20-20kHz Output=273mW(300Ω) SNR:>120dB @ 1kHz
Frequency Response:20Hz-20kHz(±0.12dB)
Output Level:16.2Vpp @ 32Ω
36.2Vpp @ 300Ω
Noise:<8.8uVrms Crosstalk:-129dB @1kHz Channel Balance:0.3 dB Output Impedance:<20Ω Output Power:1000mW x 2 @ 32Ω THD+N<1% 546mW x 2 @ 300Ω THD+N<1% Drive Ability:32-600Ω LineOut COAX Input RCA THD+N:<0.0005% @ 1kHz <0.0006% @ 20-20kHz SNR:>122dB @ 1kHz
Frequency Response:20Hz-20kHz(±0.35dB)
Output Level:2Vrms @ 0dBFS
Noise:<1.7uVrms Crosstalk:-127dB @1kHz Channel Balance:0.3 dB Output Impedance:100Ω XLR THD+N:<0.0005% @ 1kHz <0.0006% @ 20-20kHz SNR:>123dB @ 1kHz
Frequency Response:20Hz-20kHz(±0.35dB)
Output Level:4Vrms @ 0dBFS
Noise:<2.6uVrms Crosstalk:-133dB @1kHz Channel Balance:0.3 dB Output Impedance:200Ω -
-
Topping L30
৳ 13,000- L30 uses the same NFCA (Nested Feedback Composite Amplifier)module from flagship A90.Voltage Current hybrid feedback architec-ture along with UHGF (Ultra High Gain Feedback) technology provides excellent DC and AC performance.High output current drive capability allows the amp driving low impedance headphones with ease.Ultra-low noise of 0.3uV is miles ahead of the competition,giving an absurdly high dynamic range of 141dB and no audible noise and darkest background for the most sensitive IEMs.
- Upper limit of performance was limited by APX555B
- L30 has a high voltage swing of 26Vp-p,power of 3500mW per channel when both channels are driven and output impedance of less than 0.1Ohm.It easily drives power-hungry headphones with a wide range of different impedance.
- 3 step gain settings,adapt to various sensitivities
- The NFCA modules of L30 are not only able to drive the headphones but also apply to be a preamplifier with the same ultra-high performance.When it is in preamp mode,output impedance is as low as 20ohm,which is widely suitable for various devices.
-
Topping MX3
৳ 12,000- ♫ Bluetooth Reveiver: Multipule Function – Serve as Decoder, Amplifier, Headphone Amp and Bluetooth Receiver.
- ♫ TOPPING MX3 Power Amplifier: Support Bluetooth/USB/OPT/COAX/AUX inputs, easily link NFC-enabled smartphone by a single tap.
- ♫ Powerful Headphone Performance – MX3 uses OP+BUF headphone amp to provide 257Mw (32ohm) output power, 0.006% THD+D and 20-200 KHz frequency response.
- ♫ Thoughtful Humanity: Automatic turn on/turn off, NFC bluetooth connection, Treble & Bass independent control, Remote control, Digital display.
- ♫ All IN ONE: MX3 can be simple power amplifier, headphone amplifier or pre-amplifier. Just connect the MX3 with your favorite devices such as player, DAC, TV, phone etc.