Showing all 7 results
SMSL AD18 80W2 Bluetooth 4.2 HiFi USB DSP Digital Decoding Power Amplifier৳ 12,500
- Input port: 3. 5mm, USB/Coaxial/Bluetooth/Optical x 2 Output Port: Amplifier output port/Headphone Port Voltage: 24V Output power: 80W x 2 SNR(Signal to Noise): 90dB THD+N: 0. 04% Headphone output(32ohm): 53mW@THD=0. 04% USB sampling rate: 16bit: 44. 1kHz-192kHz 24bit: 44. 1kHz-96kHz Output consumption: 50W EQ adjustment: 7 Treble adjustment range: 8db Bass adjustment range: 8db Net Weight: 572g Whole Weight: 1485g Machine Size: 172*51*85mm Package Size: 275*231*74mm Package included: 1*AD18 1*Micro USB cable 1*Remote control 1*Antenna 1*Power supply
Topping A50s৳ 19,000
- ♬ ULTRA-HIGH PERFORMANCE NFCA BALANCED MODELES: A50s uses the same NFCA (Nested Feedback Composite Amplifier)module from flagship A90. Voltage Current hybrid feedback architecture along withUHGF(Ultra High Gain Feedback)technology provides excellent DC and AC performance.
- ♬ HIGH OUTPUT CURRENT DRIVE CAPABILITY: It allows the amp driving low impedance headphones with ease. Ultra-low noise of 0.3uV is miles ahead of the competition,giving an absurdly high dynamic range of 144dB and no audio noise and darkest background for the most sensitives IEMs.
- ♬ WIDE RANGE OF ADAPTATION TO HEADPHONES: A50s has a high voltage swing of 42vp-p, power of 3500mW per channel when both channels are driven and output impedance of less than 0.1ohm. It easily drives power-hungry headphones with a wide range of different impedance.
- ♬ TOPPING A50s EXCELLENT PREAMP: The NFCA modules of A50s are not only able to drive the headphones but also apply to be a preamplifier with the same ultra-high performance. When it is in preamp mode, output impedance is as low as 20ohm, which is widely suitable for various devices.
- ♬ HPA / PRE AUTOMATIC SWICHING: When the A50s is not connected to any headphones, it automatically works in the preaplifier mode, and the amplified signal is output from the RCA on the back panel. When the headphone is connected to 6.35mm or 4.4mm output, A50s automatically switches to the headphone amp mode, and the signal is only output to the 6.35mm and 4.4mm jack.
Topping A90৳ 43,000
- ♫ Headphone-amp & Pre-amp: The NFCA modules of A90 are not only able to drive the headphone but also apply to be the pre-amp. When it is in pre-amp mode, the 20ohm SE and 40 ohm balanced output impedance are widely suitable for various-power amplifiers Ultra.
- ♫ Full balanced SE Headphone Output: A90 has three output headphone jacks of 4-PIN-XLR, 4.4 balancedand 6.35 SE to meet different usages.
- ♫ 3 Step gain setting & adapt to various sensitivities: A90 is equipped with three gain settings of -95dB/0dB/9.5dB for SE and-35dB /6.0dB/15.5dB for balanced. The SE 25Vpp / balanced 49Vpp high output voltage.
- ♫ High output current drive capability A the amp driving low impedance headphones with ease: Ultra low noise of 0.2uV is miles ahead of the competition giving absurdly high dynamic range of 145dB and no audible noise and darkest background for the most sensitive IEMS.
- ♫ Ultra-high Performance NFCA modules: A90 implemented the first member of the new NFCA(Nested Feedback Composite Amplifier) module series Voltage Current hybrid feedback architecture along with UHGF(ultra high gain feedback) technology rovide excellent DC and AC performance.
Topping L30৳ 13,000
- L30 uses the same NFCA (Nested Feedback Composite Amplifier)module from flagship A90.Voltage Current hybrid feedback architec-ture along with UHGF (Ultra High Gain Feedback) technology provides excellent DC and AC performance.High output current drive capability allows the amp driving low impedance headphones with ease.Ultra-low noise of 0.3uV is miles ahead of the competition,giving an absurdly high dynamic range of 141dB and no audible noise and darkest background for the most sensitive IEMs.
- Upper limit of performance was limited by APX555B
- L30 has a high voltage swing of 26Vp-p,power of 3500mW per channel when both channels are driven and output impedance of less than 0.1Ohm.It easily drives power-hungry headphones with a wide range of different impedance.
- 3 step gain settings,adapt to various sensitivities
- The NFCA modules of L30 are not only able to drive the headphones but also apply to be a preamplifier with the same ultra-high performance.When it is in preamp mode,output impedance is as low as 20ohm,which is widely suitable for various devices.
Topping MX3৳ 12,000
- ♫ Bluetooth Reveiver: Multipule Function – Serve as Decoder, Amplifier, Headphone Amp and Bluetooth Receiver.
- ♫ TOPPING MX3 Power Amplifier: Support Bluetooth/USB/OPT/COAX/AUX inputs, easily link NFC-enabled smartphone by a single tap.
- ♫ Powerful Headphone Performance – MX3 uses OP+BUF headphone amp to provide 257Mw (32ohm) output power, 0.006% THD+D and 20-200 KHz frequency response.
- ♫ Thoughtful Humanity: Automatic turn on/turn off, NFC bluetooth connection, Treble & Bass independent control, Remote control, Digital display.
- ♫ All IN ONE: MX3 can be simple power amplifier, headphone amplifier or pre-amplifier. Just connect the MX3 with your favorite devices such as player, DAC, TV, phone etc.
Topping TP60৳ 17,500
- TP60 use original TA2022.Germany ERO electronic capacity.USA DALE resistance.JAPAN sanyo resistance.
- TP60 audio transmission use the Germany Siemens capacitor.
- TP60 power use the USA CDE capacitors , panosonic FM capacitors and ONSEMI rectifiers.
- TP60 has 2 analog inputs.it is very easy to switch to press the input select on the panel .
- TP60 use the special inductance and there isn’t heat when it is working.